Stainless steel Angle steel is a bar shaped stainless steel plate with vertical angles on both sides. There are equal side stainless steel Angle and unequal side stainless steel Angle. The two sides of equilateral stainless steel Angle steel are the same width. The specification is indicated in millimeters of side width × side width × side thickness. Such as "∠25×25×3", it indicates that the side width is 30mm, the side thickness is 3mm equal side stainless steel Angle. It can also be indicated by the model number, which is the number of centimeters of the width of the side, such as ∠3#. The model does not indicate the specifications of different side thicknesses in the same model, so fill in the specifications of the side width and side thickness of the stainless steel Angle steel on the contract and other bills to prevent independent model indication. Reza equilateral stainless steel Angle steel specifications for 2#-20#.

Stainless steel Angle steel can be constructed according to the different structure must constitute a variety of different bearing prefabricated components, can also be used as a connection of the butt fastener. It is widely used in a variety of building structures and engineering project structures, such as roof beams, highway Bridges [/url], transmission and distribution towers, lifting and conveying machinery, ships, industrial furnaces, reaction tanks, vessel racks and storage shelves.

Stainless steel Angle steel is carbon steel for construction, is a simple cross section of channel steel stainless steel plate, the key used for metal structure and industrial plant structure. It has good malleability, plastic deformation performance and certain impact toughness in application. The raw material slab of stainless steel Angle steel is low carbon and environmental protection square slab, and the finished stainless steel Angle steel is delivered under the condition of hot tie forming, quenching or hot tie.

Type and specification

The key is divi